Before lab materials arrive, your table can use legs of red oak with non-skid glides. Put this 6-foot Book Compartment Table with ChemGuard Top where that pressure shows up first. When your science rooms must support books, materials, and shared work without leaving the table surface to carry every task, a science and lab table gives you a dedicated place for working and compartment storage. This 6-foot-wide table has a 30-inch-deep by 30-inch-high overall footprint and a ChemGuard top, putting the dimensions and top specification directly into your planning review. The book compartments provide measured storage volume beneath the work area, while the stated 500-pound weight capacity gives your team a specific figure for evaluating intended use. Whether you are fitting out a classroom, laboratory, or shared preparation room, those details let you compare the table against the actual space and workload you manage.
The aprons are smoothly machined and finished with acrylic finish. Book compartment aprons are constructed of solid oak and measure 13/16-inch deep by 4 1/2-inch high. The book compartments measure 14 1/4-inch wide by 3 7/8-inch high by 12 3/4-inch deep. The corner braces are 13 gauge steel, and the legs have 5/16-inch hanger bolts installed. Nuts and washers attach the legs to the aprons.
Non-skid adjustable glides provide precise leveling, and rubber leg boots are included in the table configuration. These details give you the specific construction and dimensional information needed for space planning, purchasing review, and coordination with the room's intended use. Your installation plan can account for the table's 6-foot width, 30-inch depth, and 30-inch height when arranging workstations, circulation paths, and storage locations. The ChemGuard top is paired with the solid red oak leg and apron construction described above, while the book compartment dimensions let you evaluate the material each compartment can accommodate before placing the order. The adjustable glides provide a way to address leveling during placement, and the rubber leg boots remain part of the listed configuration. Overall size is 6 feet wide by 30 inches deep by 30 inches high, so plan the bay from those measurements, not from a photo alone. Confirm the layout against traffic flow, then put the piece on the purchase list.
Ships ready for easy assembly.