Instructors managing supplies keep a desk with locking drawers and a black epoxy resin top nearby. Put this 8-foot Instructors Desk where that pressure shows up first. The unit serves as a complete demonstration center with a work surface, sink, locked cupboard storage, and drawers for the materials your students and instructors handle during a lesson. That matters when the room must support instruction and preparation without leaving every active item exposed on a shared counter. Constructed of solid oak, oak and hardwood veneers, the unit has a 1-inch black epoxy resin top.
Its epoxy-coated steel drawer glides use nylon bearings, and the cupboard plus all five drawers lock. Included equipment consists of one mixing faucet, one double gas cock, a GFI-protected AC duplex receptacle, a polypropylene trap, a set of support rods and crossbar, and locks for the cupboard and drawers. Overall dimensions are 8 feet wide by 30 inches deep by 36 inches high. The cupboard measures 34 1/2 inches wide by 28 inches deep by 29 1/2 inches high.
Small drawers measure 14 3/4 inches wide by 19 inches deep by 5 1/2 inches high, while large drawers measure 33 3/4 inches wide by 19 inches deep by 5 1/2 inches high. The sink measures 18 inches wide by 15 inches deep by 11 inches high. For your room plan, the 8-foot width creates a single work center for demonstration and preparation, while the 30-inch depth and 36-inch height establish its overall footprint. You can use the locking cupboard and five drawers for materials that need to remain contained between lessons, with the faucet, gas cock, receptacle, trap, support rods, and crossbar included in the configuration. Overall size is 8 feet wide by 30 inches deep by 36 inches high, so plan the bay from those measurements, not from a photo alone. Confirm the layout against traffic flow, then put the piece on the purchase list.