Pro Tips — Training Tables
Training Tables Pro Tips
Ten expert tips to help you buy the right training tables, set up better room configurations, and avoid the common mistakes that plague training room installations.
1Verify Nesting Before You Buy
Not all flip-top tables nest together. Confirm the tables you order will nest — most manufacturers show the storage footprint in spec sheets.
2Plan Electrical Before Furniture
If you want built-in power modules, plan electrical rough-in before finalizing table placement. Power-equipped tables need fixed positions.
3Use 24" Per Person Minimum
Less than 24" per person feels cramped with a laptop. Use 24" as a hard minimum; 30" per person if budget allows for comfort.
4Buy Locking Casters
Each caster should lock individually. Test that every caster locks — a table that rolls during class is distracting and potentially unsafe.
5Order Ganging Clips
Table ganging clips connect adjacent tables to prevent separation. Essential in classroom rows — otherwise tables drift apart during the day.
6Chevron Over Rows
Chevron layouts improve sight lines and engagement over dead-straight rows with almost no extra cost. Try it once and you'll never go back to straight rows.
7Size for 80% Capacity
Design your training room for 80% of maximum capacity as the comfortable norm. A room always at 100% creates a poor learning environment.
8Match Casters to Flooring
Hard-floor casters on carpet get stuck. Carpet casters on hard floors scratch. Always specify your flooring type when ordering flip-top training tables.
9Add Edge Banding
Specify PVC edge banding on table surfaces (as opposed to paint or tape edges). It lasts far longer under the daily handling training tables receive.
10Plan for Instructor Space
Reserve at minimum 6' of clear space at the front of the room for the instructor. This area needs power, AV connectivity, and no table obstruction.
