Conference Tables > Folding

Match the table length to how many people actually show up to meetings, not how many chairs you could squeeze in. Small 6 to 8 foot tables seat 4 to 6, medium 8 to 12 foot tables seat 8 to 12, and the big 14 to 24 foot tables seat a dozen on up to two dozen across a 42 to 48 inch wide top. Pull out a tape measure, mark the floor with painter's tape, and you will know in two minutes if it fits the room.

Rectangular tops pack the most seats per foot and work great for boardrooms and training. Racetrack and boat shapes round off the corners so everyone has a partial angle toward a video camera at one end. Round tops are friendlier for 4 to 8 person team huddles where everyone needs to weigh in. Modular tops in trapezoid or rectangular wedges connect into U-shape, T-shape, or hollow square layouts when the same room has to switch jobs week to week.

Panel and slab bases look heavy and hide cable raceways underneath. Trestle bases give you a defined leg at each end with wide open knee room across the middle. X-bases anchor mid-length tops on a single intersection. Column bases hold up a round or square top on one pedestal. Modular leg sets pair with segmented tops if you reconfigure the room often. Check the chair clearance at each seat before you click buy so nobody is straddling a leg.

Yes — most commercial conference tables drop 1 to 3 power and data modules along the centerline, each one giving you 2 to 3 outlets plus 2 to 4 USB ports off a 15 amp circuit. Grommets 2 to 3 inches across handle HDMI, network, and audio cables routed down to a floor box. The product page tells you whether the power is wired at the factory, added by the dealer, or finished by your own electrician on site.

High pressure laminate over an engineered core is the workhorse build for 8 to 16 person rooms because the surface shrugs off scratches, hot coffee cups, and daily wiping. Wood veneer over an engineered core steps you up into executive-boardroom territory. Tempered glass on a metal or wood base is the modern look when you want the room to feel open. Edge banding is 3mm PVC or ABS on laminate and a wrapped veneer on the higher-end tier.

Plan on 150 to 650 pounds of table depending on length and base, shipping LTL on one pallet with the top crated apart from the legs. Two people and 1 to 3 hours will knock out a one-piece table; 3 to 6 hours for a segmented modular setup. White-glove install is worth it for an executive boardroom where the room is finished and the table has to land set, leveled, and ready for the first meeting.

Leave 4 feet of clear floor behind every chair so people can scoot back and walk past. A 12 person rectangular table 14 feet long needs a 24 by 14 foot room as the minimum. Add door swing, AV cart space, and any credenza depth on top of that. If a wheelchair seat is in the plan, give it a 30 by 48 inch clear floor patch and 27 inches of knee room under the apron.

Lock in the AV layout first, then order the table so the centerline modules, floor box, mic drops, and camera angles line up. Racetrack and boat shapes flatter single-screen video calls because the outer seats stay inside the camera frame. Rectangular tops are the better pick when you have two displays and side cameras. The product page shows where the grommets and power modules land so your installer can route cable before the freight arrives.

Tables built to the office furniture standard X5.5 carry a 10 to 15-year structural warranty in the industry versus 1 to 3 years on cheap consumer pieces, but we offer a Free Lifetime Warranty unless specifically noted. Heat, scratch, and stain resistance are measured against the laminate ratings. Wipe with a pH-neutral cleaner, glance at the grommet collars and module covers once a year, and a good table will outlast the room renovation.

Conference tables at 29 to 30-inch surface height land within the ADA accessible work surface range of 28 to 34 inches. For fully accessible seating positions, ADA requires 27 inches of knee clearance height by 30 inches wide by 19 inches deep under the apron, and a 30 by 48-inch clear floor approach per wheelchair position. ADA also calls for at least 36 inches of accessible aisle clearance around the table perimeter so wheelchair users can navigate without obstruction. Commercial tables built to ANSI/BIFMA X5.5 standards meet structural requirements; accessible seating compliance depends on the base style and room layout you choose.