Low Bookcases > # of Shelves - 2

A low bookcase gives you a counter-height (28 to 36 inch tall) open-shelf storage piece that doubles as a credenza surface or a printer stand. You get the same finish family as your desk and a clean landing zone for a printer, a plant, or framed art. A great pick for under-window placement where taller cases would block daylight.

Most low bookcases run 30 to 36 inches wide, 12 to 14 inches deep, and 28 to 36 inches tall. Pull out a tape measure on your wall — most rooms can fit two or three side-by-side under a typical window. The 12 to 14 inch depth keeps the bookcase out of the aisle.

You can grab 1 to 2 shelves inside the case — typically 1 fixed at the midpoint plus 1 adjustable on a 1-inch pin-hole grid. Each shelf holds 35 to 50 pounds. The top surface gives you a third effective shelf for the printer or the desktop accessories you want to land there.

You can grab thermally fused laminate (TFL) for the wallet-friendly pick, high-pressure laminate (HPL) for harder-use rooms, or wood veneer over engineered core for the executive coordinated look. Match the bookcase finish to your desk and credenza for a clean office look.

No — at this 28 to 36 inch height, the commercial tip-over rule doesn't kick in. The 12 to 14 inch footprint depth gives you passive tip-over stability without the anchor hardware. Taller bookcases (above 42 inches) need a wall anchor though.

Yes — the top surface holds up to 35 pounds of printer, plus paper trays and toner storage. That's enough for most laser and inkjet office printers. For heavier copiers (60+ pounds), pick a printer-specific cabinet instead of a low bookcase.

Most low bookcase lines pair with a matching desk, credenza, tall storage, and standard bookcase in the same finish family. That's a great way to lock in a coordinated look. Order from the same product line as your desk to keep the finishes matching across the office.

You can grab a 3mm PVC edge band as the standard pick (durable, matches the top color) or a 2mm matching edge for the wallet-friendly version. Wood veneer versions get a matching wood edge band. The 3mm edge is the right fit for hard-use offices.

Yes — the top surface at 28 to 36 inches sits inside the ADA forward-reach range of 15 to 48 inches. Store your most-used contents on the top surface or the upper shelf for accessible programs. Keep the bookcase footprint out of the 36-inch accessible aisle.

Commercial low bookcases built to the BIFMA X5.9 testing standard for storage duty carry a 10 to 12-year warranty in the industry against consumer-grade bookcases at 1 year, but we offer a Free Lifetime Warranty unless specifically noted. The case, the shelf clips, the adjustable shelf, the back panel, and the edge band are all covered.