Staff lose time when the next step in a job means walking across the room for a missing piece. Put this Stool with Backrest where that pressure shows up first. When your kitchen counter is asking people to stand or borrow seating from another work area, a kitchen stool with a backrest gives your team a consistent place to sit at the counter. This 30-inch kitchen stool adds a backrest to that seating arrangement, while its 30-inch height establishes the working level stated for the unit. The result is seating that matches the height requirement you are already managing. The seat measures a full 14 inches in diameter and includes an 11 1/2-inch diameter masonite board recessed into the seat pan.
The masonite board is specified to resist chipping and cracking. Eight rivets on the seat help prevent warping. The stool is made with 18-gauge, 7/8-inch steel tubing. Its backrest adjusts 2 inches up and down and 2 inches forward and back, allowing you to set its position within those specified adjustment ranges.
Each leg has four contact points at the footring connection for added rigidity. Together, they give you the specific materials and dimensions needed to evaluate the stool against your counter and seating plan. The 14-inch round seat establishes the seating surface, while the backrest provides the additional component for the seated position. The footrings are connected to each leg, so the leg locations and counter height should be considered when you place the stools in your kitchen or service area. Match the look to the suite, check the floor plan, and order for the next install window. Use the piece where the work already happens so the handoff stays short. Plan the layout so people can move without shifting gear mid-task.
Ships ready for easy assembly.