Shared spaces run smoother when each station has a job and the walk path stays open. This Task Master Deluxe Industrial Chair belongs in that conversation. The workstations where your team drafts, inspects, and records leave little room for a chair that cannot change with the task. For an office manager balancing varied workstations and repeated daily use, those controls put the chair's movement where your team needs it: at the seat, backrest, and overall height. Its stated overall height ranges from 17 inches to 35 inches, and the patented wave tube extension offers an additional 10 inches of height.
An eight-inch pneumatic lift provides another specified height component. The backrest tilts 22 degrees, with ergonomic knob controlled backrest height adjustment, while the seat tilts 10 degrees through paddle lever controls. A high, mid, or low-rung polypropylene footrest mounts securely to the 26-inch diameter base.
The dimensions listing records a 45-inch height, so you have both the listed measurement and the stated adjustment details when reviewing placement at your workstations. These specifications give you concrete points to compare against counter heights, drafting surfaces, and the range of movement your employees need during the day. You can configure each drafting stool with a high, mid, or low-rung polypropylene footrest according to the working position at that station. That makes this chair a practical fit when your office needs one drafting stool configuration to accommodate different working heights and positions. Overall size is 0 inches wide by 0 inches deep by 45 inches high, so plan the bay from those measurements, not from a photo alone. Walk the footprint with a tape measure before the order goes in. Walk the footprint with a tape measure before the order goes in. Confirm the layout against traffic flow, then put the piece on the purchase list.
Ships ready for easy assembly.