Stand-Alone Desks > Pedestals / Drawers - 0

A stand-alone desk is a single straight desk without a return, bridge, or extension — just one rectangular work surface with legs. It is the simplest, most flexible desk format and the easiest to fit into most rooms. Widths usually run 48 to 72 inches and depth 24 to 30 inches, with weight 70 to 160 pounds depending on whether it has drawers built in.

Grab a stand-alone when you have a smaller room, when you are setting up a shared office for two people side by side, or when you might rearrange the room a few times over the next couple of years. Stand-alones are way easier to move and reposition than L-shaped or U-shaped desks, and they fit more rooms without forcing a redesign. They are also the cheapest commercial desk format.

A 60 by 30 stand-alone fits comfortably in an 8 by 8-foot room with 42 inches of open space behind the desk for the chair. If foot traffic walks behind you, bump that to 48 to 60 inches. Stand-alones are forgiving on room size because the single straight footprint slides easily against a wall or into a corner without locking you into a specific orientation.

A solid commercial stand-alone handles 200 to 300 pounds spread across the top, which covers dual monitors, a tower, a printer, a lamp, and the usual desk gear with room to spare. Heavy-duty picks step up to 300 pounds and more. Lighter consumer desks should stick to a laptop, one screen, and a lamp — they will flex under heavier loads.

A stand-alone usually goes together in 30 minutes to 2 hours with one or two people. Single pedestal and shell models lean closer to the quick end, while a fully loaded double pedestal lands at the longer end. Numbered parts and a step-by-step booklet make it doable solo for most models, but a second pair of hands speeds up the heavy lifting and helps level the feet.

Yes, on most heavy-duty lines. The desk and hutch share matching attachment points and finishes, so you can buy the stand-alone today and grab a matching hutch next year when the budget allows. The collection page shows the matching pieces. If a hutch is in your future plan, stick with a desk from a current production line so the matching hutch is still available later.

Stand-alones are by far the easiest commercial desks to move because there is no return or bridge to disconnect first. Two people can carry an assembled 60-inch stand-alone through a doorway and around corners without taking it apart, in most cases. If you rearrange offices often or move every couple of years, a stand-alone saves real time on moving day.

Many top-selling stand-alones ship quickly since they are the simplest format and the warehouse stocks them in volume. Specialty finishes or unusual sizes sometimes take a bit longer because they are made on demand. The product page shows current stock status and a ship-time estimate, so you can sanity-check the delivery window before ordering.

On stand-alone desks, we offer a Free Lifetime Warranty unless specifically noted — the worksurface, frame welds, edge banding, and hardware are all covered. Consumer desks typically come with 1 to 3-year warranties, so the lifetime coverage is a real step up. Stand-alone desks tested under ANSI/BIFMA X5.5 standards are built for a 10-year commercial life span, and the coverage matches that standard. Pick one, set it up, and know you are covered for as long as you use it.

Stand-alone desks at standard 29 to 30-inch work height fall within the ADA accessible work surface range of 28 to 34 inches. For a fully accessible position, ADA requires 27 inches of knee clearance height by 30 inches wide by 19 inches deep under the apron, plus a 30 by 48-inch clear floor approach for wheelchair use. Shell and single-pedestal configurations offer the most open knee clearance by default. Commercial stand-alone desks built to ANSI/BIFMA X5.5 standards meet the structural requirements; clearance compliance depends on whether the model has built-in pedestals or a center modesty panel.