A station stays open with an assembled 24-inch stool built from heavy-duty steel. This Padded Stool belongs in that conversation. Your staff moves between standing work and seated tasks, and these kitchen stools establish a stated 24-inch height for the short periods when a shared counter or work area calls for a seat. Without a consistent seating point, people pull chairs from nearby rooms, interrupt another team's setup, or remain standing through work that was planned around a seated position. A 24-inch stool gives you a specific dimension to match against the surfaces and routines already in your workplace. The padded vinyl seat and steel seat pan are the named seat components, giving you two distinct parts to review when comparing the specification with your location.
The stool uses 18-gauge, 7/8-inch steel tubing. A 1/2-inch-thick vinyl pad is riveted through the steel seat pan, so you can distinguish the padded surface from the pan beneath it when reviewing the construction. Each leg has a 5/8-inch outside-diameter foot ring welded at four contact points. The source identifies those welded contact points as adding rigidity.
The stool is 24 inches high, a dimension you can place against your own measurements when assessing a counter, work area, or other seating location. For your floor plan, this kitchen stool's configuration centers on a 24-inch-high seat, a padded vinyl seat, a steel seat pan, and a foot ring welded to each leg. The four welded contact points give you a construction detail to verify against the way your team uses each stool. The 18-gauge tubing, 1/2-inch pad, 7/8-inch tubing, and 5/8-inch outside-diameter foot ring are all stated measurements, so your purchasing record can retain more than a general description. For a business owner, that specificity keeps the selection tied to the room, the task, and the measurements your team will use after the order is placed. Grab the configuration that fits the bay and put it on the buy list for this room.
Ships fully assembled.